PAGE 1 OF 15
0922 IH-99
H-99
INDUSTRIAL AUTOMATIC
TAPE DISPENSER
1-800-295-5510
uline.com
NOTES
FEATURES
• If using automatic feed, when one piece of tape is
removed, the unit will automatically feed and cut
the next piece at the preset length.
• The tape length is easily seen on the LED display,
and operation is simple. Press the CM key or MM key
to set the length. (Setting limit 20mm to 999mm.)
• If a piece of long tape is needed, press the
ADVANCE key for desired length, then press CUT key
to cut.
• The blade unit can be removed and replaced easily.
(Tape jamming is also easily fixed by removing the
blade unit.)
Do not leave the tape
dispenser in direct sunlight.
Do not drop the tape
dispenser or subject it to
heavy shocks.
Do not use volatile liquids
(benzine, thinner, etc.)
to clean the dispenser.
Wipe with dry cloth only.
Do not use the tape dispenser
in humid or dusty places.
Do not insert bars or plates
into the tape outlet-this will
damage the blades.
DO NOT insert your fingers
into the tape outlet!
Para Español, vea páginas 6-10.
Pour le français, consulter les pages 11-15.
