Remote Control Installation
For convenience, the remote control may be
installed on a wall near the water heater.
Keep the remote control dry.
Remote Control Batteries
•
Insert coin into slot and twist
counterclockwise to open the battery cover
•
Use a CR2025 battery. The ‘+’ side should
face upwards
•
Insert coin into slot and twist clockwise to
close the battery cover
12
Front cover
Filling the Tank
After all the pipes are connected, open the discharge valve of the water heater and then the feed
valve. Fill the water heater with water and exhaust the air till a uniform water stream flows out of the
hot water outlet. This indicates that the water heater has been filled up. Close the hot water
discharge valve and check all connections for any leakage. If leakage occurs, empty the water tank,
repair the leaked connection and then refill the heater with water. Do not close the feeding valve
during the filling of water.
