Clear Heat Pump Faults
Operation
Display
Description
Move to “
CLEAR HEAT PUMP
FAULTS
” by pressing the Up/Down
button, then press SELECT button
to start this clearing process.
The “
CLEAR HEAT PUMP FAULTS
”
interface
will
be
displayed
subsequently. Press YES button to
excute the clearing or press the
NO button to cancel the clearing.
The clearing command will be
sent to all the heat pump units if
the YES button is pressed in
previous step and the UIM will
display “COMMAND SENDING
…
”
The clearing is successful if
the UIM display
“SUCCEEDED!”.
If the UIM display
“FAILED!”, it indicates the
clearing is unsuccessful,
please check the
communication
between the central
controller and the heat
pump units.
Press BACK button to return to
the previouse UIM interface.
Note: The fault information of ALL the heat pump units will be cleared after this operation.
USER SETTING
USER PUMP ON INTVL 30min
USER PUMP ON TIME 20min
AUX HEAT AT H-AMBT OFF
CLEAR HEAT PUMP FAULTS
HX CLEAN RESET
T
CLEAR HEAT PUMP FAULTS
CLEAR ALL THE HEAT
SUCCEEDED！
PUMP FAULTS？
CLEAR HEAT PUMP FAULTS
CLEAR ALL THE HEAT
COMMAND SENDING…
PUMP FAULTS？
CLEAR HEAT PUMP FAULTS
CLEAR ALL THE HEAT
PUMP FAULTS？
USER SETTING
USER PUMP ON INTVL 30min
USER PUMP ON TIME 20min
AUX HEAT AT H-AMBT OFF
CLEAR HEAT PUMP FAULTS
YES NO
SELECT BACK HELP
HX CLEAN RESET
T
SELECT BACK HELP
