Conversion of gas type..........17
Maintenance..........................17
Performance check.......................... 18
Water-side maintenance................... 18
10.2.1 Inspect the anode............................18
10.2.2 Inspect the inlet security group......... 18
10.2.3 Descale the tank............................. 19
10.3
Gas-side maintenance......................19
10.3.1 Clean the burners............................19
10.3.2 Clean the combustion chamber..........20
10.3.3 Assemble the burners...................... 20
10.3.4 Finalization..................................... 20
Troubleshooting.................... 20
General..........................................20
11.1.1 Safety thermostat........................... 20
11.1.2 T.R.S. (Thermal Reflux Safeguard)..... 20
11.1.3 Condensation..................................21
11.2
General errors.................................22
Appendices............................23
Technical details.............................. 23
Dimensions.....................................24
EcoDesign details............................ 25
Gas details..................................... 27
Declaration of conformity..................29
Warranty........................................ 30
1 Introduction
The BTL water heater stores and heats water for
sanitary purposes.
Cold water enters the tank (3) through the water
inlet (2). The heated water leaves the tank at the
top through the hot water outlet (1). When hot
water is used, the tank of the water heater is
filled with the same amount of cold water.
To operate the water heater, the control knobs on
the gas control valve (5) are used.
Fig. BTL water heater
1
2
5
4
3
1. Water outlet
2. Water inlet
3. Tank
4. Outer door
5. Gas control valve
2 Safety
A.O. Smith cannot be held responsible for
damages or injuries which can be lead back to:
•
Failure to follow the instructions provided in
this manual.
•
Carelessness during use or maintenance of
the water heater.
Every user must study the user part of this
manual and must follow the instructions in this
part of the manual strictly. Do not change the
sequence of the described actions. This manual
must be available for the user and service
engineer at all times.
Warning
w
6
User part