A/O Bicycle FRIDA Assembly Manual Download

Page: 8 / 23

WE STRIVE FOR PERFECT BUT KNOW IT’S NOT ALWAYS POSSIBLE.

WE NEVER LEAVE A RIDER BEHIND. CALL 228.901.8386 OR EMAIL [email protected]

Note

Take the Quick Release

Front Wheel and fully

insert the Rod

(QR3)

into the hollow axle.

After Step 03, no tools

are required to install the

front wheel. If the brakes

are too tight and won’t

allow the front wheel to

insert completely into

the fork (see Step 05),

reference Step 06.

Slide the Quick Release

Skewer completely

through the hub.

Quick Release Skewers must

be installed correctly to avoid

bicycle damage and/or injuries.

QR3

NOTE

Spin the front fork

so the brakes are

pointing forward.

Turn the handlebars to

match the CORRECT

image, making sure

the cables don’t loop

around the headtube.

Find the Quick Release Skewer.

All the parts for the Quick

Release Skewer are attached.

Remove the adjustment nut

(QR5)

and spring #2

(QR4)

from the rod

(QR3)

INCORRECT

CORRECT

The brakes are

behind the fork

The brakes are

facing away from

the bike frame

QR1

QR4

QR2

QR3

QR5

Summary of Contents for FRIDA
























Search results

Summary of Contents for FRIDA

Reviews:

Related manuals for FRIDA

Brands by name

Popular brands

A/O Bicycle FRIDA, Assembly Manual

Search results

Summary of Contents for FRIDA

Reviews:

Related manuals for FRIDA

Brands by name

Popular brands