7
OPERATION CONTROLS AND FUNCTIONS
Receiver Panel
q
POWER LED:
The power indicator is always on when the Receiver is powered on.
w
FIBER LED:
The optical fiber connection indicator is always on when the Transmitter and Receiver
establish a normal optical fiber signal connection.
e
HDMI LED:
The HDMI signal output indicator is always on when the HDMI OUT port of the
Receiver outputs signals to the HDMI display device.
r
IR IN:
Connect to IR Receiver cable. The IR signal will send to the IR OUT port of the Transmitter.
t
IR OUT:
Connect to IR Blaster cable. The IR signal is from the IR IN port of the Transmitter.
y
SERVICE PORT:
Firmware update port.
u
DC 5V:
DC 5V/1A power supply port
i
FIBER:
Connect the Receiver optical fiber module, and receive signals from the Transmitter via
an optical fiber cable.
o
HDMI OUT:
HDMI signal output port, connect to HDMI display device such as HDTV or Projector
with an HDMI cable.
a
AUDIO OUT:
Audio signal extracting output port (extract the HDMI OUT audio signal), connect to
audio output device such as amplifier or speaker.
s
RS-232:
RS-232 signal pass-through port for transmitting RS-232 command signals between the
Transmitter and Receiver.
