5
OPERATION CONTROLS AND FUNCTIONS
Transmitter Panel
q
POWER LED:
The power indicator is always on when the Receiver is powered on.
w
FIBER LED:
The optical fiber connection indicator is always on when the Transmitter and Receiver
establish a normal optical fiber signal connection.
e
HDMI LED:
IN:
The HDMI signal input indicator is always on when there is signal input on the HDMI IN port.
LOOP:
The HDMI loop output indicator is always on when the HDMI OUT port of the Transmitter
outputs signals to the HDMI display device.
r
IR IN:
Connect to IR Receiver cable. The IR signal will send to the IR OUT port of the Receiver.
t
IR OUT:
Connect to IR Blaster cable. The IR signal is from the IR IN port of the Receiver.
y
AUDIO SWITCH:
Switch to select audio signal source (HDMI IN or LINE IN). When there is no
video signals input, audio signals can be transmitted separately.
u
EDID DIP SWITCH:
Dial the switch to set EDID.
11:
Copy RX HDMI OUT
10:
Copy TX HDMI LOOP OUT
01:
4K60_2CH
00:
1080P_2CH
i
SERVICE PORT:
Firmware update port.
o
DC 5V:
DC 5V/1A power supply port
a
FIBER:
Connect the Transmitter optical fiber module, and transmit signals to the Receiver via an
optical fiber cable.
s
HDMI OUT:
HDMI video loop output port, connect to HDMI display device such as TV or Projector
with an HDMI cable.
