10
OSD Menu
3. ZOOM MODE RATIO:
Sets the percentage amount to zoom or shrink the image when
“Zoom
Mode”
is active.
4. HDCP:
Selects the HDCP logic to use with the HDMI input. Setting this to
“Off”
will completely
disable HDCP support on that input.
5. NO SIGNAL COLOR:
Selects the free run color to use when no live input source is detected.
6. BLANK:
Allows for the output video and audio to be blanked/ muted.
7. FREEZE:
Allows for the output video to be frozen. While the output is frozen, audio output will
also be muted.
8. AUTO SYNC OFF:
Sets the amount of time to continue outputting sync with the free run color
if there is no live source and no operations have been executed on the unit. Setting this to
“OFF”
forces the unit to always output sync.
9. OUTPUT SETTING:
Allows for configuring the following special video signal handing functions.
• Bypass Enable:
Enables or disables source bypass mode. When this is enabled, the video
signal will be passed without modifi cation.
• Output 4K(6G) YUV420:
Enables or disables the 4K@50/60 4:4:4 to 4K@50/60 4:2:0 color
space conversion function.
Note:
Enabling Bypass mode will grey-out/disable the following Video Menu sections: Aspect, Zoom
Mode Ratio, Freeze, Blank, and the entire Picture Menu section.
PICTURE
2ND LEVEL
3ND LEVEL
COLOR GAIN R
0~1023
(512)
COLOR GAIN G
0~1023
(512)
COLOR GAIN B
0~1023
(512)
COLOR OFF SET R
0~1023
(512)
COLOR OFF SET G
0~1023
(512)
COLOR OFF SET B
0~1023
(512)
BRIGHTNESS
0~60
(30)
CONTRAST
0~60
(30)
HUE
0~60
(30)
SATURATION
0~60
(30)
Summary of Contents for ANI-4KHPN
Page 18: ...16 CONNECTION DIAGRAM...
