6
RS-232 & Telnet Commands
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
DESCRIPTION & PARAMETERS
?
8
Show the full command list.
HELP
8
Show the full command list.
GET FW VER
8
Show the unit’s current firmware version.
SET FACTORY DEFAULT
8
Reset all configurations to the factory defaults.
SAVE PRESET N1
8
Save the current configuration as preset
N1
.
N1
= 1 ~ 4
[Preset number]
RECALL PRESET N1
8
Recall the saved configuration from preset
N1
.
N1
= 1 ~ 4
[Preset number]
SET OUT A ROUTE N1
8
Switch to full screen routing mode and show input
N1
.
N1
= 1 ~ 2
[Input port]
GET OUT A ROUTE
8
Show the currently set full screen routing source.
SET WINDOW LAYOUT MODE N1
8
Set the windowing mode to
N1
.
Available values for
N1
:
1
[PIP mode]
2
[SBS mode]
4
[POP mode]
5
[Full screen routing mode]
GET WINDOW LAYOUT MODE
8
Show the currently selected windowing mode.
SET OUT A WINDOW PRIORITY N1
Select which input window will have top display priority in the dual-windowing modes.
N1
= 1 ~ 2
[Input port]
GET OUT A WINDOW PRIORITY
8
Show which input window currently has top display priority.
SET WINDOW SWAP N1
8
Enable or disable the input window swap function.
Available values for
N1
:
0 [Off]
1 [On]
GET WINDOW SWAP
8
Show the current state of the window swap function.
SET IN AUTO MODE N1
8
Enable or disable the auto input switching mode.
Available values for
N1
:
0 [Off]
1 [On]
GET IN AUTO MODE
8
Show the current state of the auto input mode.
SET IN N1 EDID N2
8
Set the EDID to use with input
N1
.
N1
= 1 ~ 2
[Input port]
Available values for
N2
1
[Internal EDID 1]
2
[Internal EDID 2]
GET IN N1 EDID
8
Show the EDID source currently used by input
N1
.
N1
= 1 ~ 2
[Input port]
A
NEU
VIDEO
