16
OPERATION
KEY
Reset the operation panel to initial mode:
How to use the LUMA KEY effect:
→
Press the KEY button
to place the unit in KEY mode.
→
Press one of the A-bus selection buttons to select a source.
→
Press one of the B-bus selection buttons to select a source.
→
Press the LUMA KEY button
. The darker areas of the picture will become transparent and allow the image of the other source
to show through.
→
Use the Video Slider
to control the LUMA KEY level.
→
Press button
or
to change the source that is being keyed.
→
Press the LUMA KEY
again to reverse the LUMA KEY effect.
How to use the BLUE KEY effect:
→
Press the KEY button
to place the unit in KEY mode.
→
Press one of the A-bus selection buttons to select a source.
→
Press one of the B-bus selection buttons to select a source.
→
Press the BLUE KEY button
. The blue areas of the picture will become transparent and allow the image of the other source to
show through.
→
Use the Video Slider
to control the LUMA KEY level.
→
Press button
or
to change the source that is being keyed.
→
Press the Blue KEY
again to reverse the BLUE KEY effect.
