Network Camera User’s Guide
35/96
Key value of WEP.
WPA settings:
- WPA Key:
Key value of WPA. The device uses a pre-shared key (PSK) for key
management. The pre-shared key can be entered either as Manual hex,
as 64 hexadecimal characters, or as a Passphrase, using 8 to 63 ASCII
characters.
Obtain IP address automatically (DHCP):
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically.
IP address, Subnet mask, and Gateway:
If you do not select
Obtain an IP address automatically
, then you need to enter these
network parameters manually.
Select “OK” to save and enable the setting.
Note
: To enable WLAN function, user must set these related parameters correctly at first.
Then power off the device and remove Ethernet cable from device. Power on the device
again and WLAN mode will be available accordingly.
HTTPS
HTTPS: Stands for Hypertext Transfer Protocol Secure
HTTPS is a combination of the Hypertext Transfer Protocol with the SSL/TLS protocol to
provide encrypted communication and secure identification of a network web server.
HTTPS connections are often used for sensitive transactions in corporate information
systems. The main idea of HTTPS is to create a secure channel over an insecure
network. This ensures reasonable protection from eavesdroppers and man-in-the-middle
attacks, provided that adequate cipher suites are used and that the server certificate is
verified and trusted.
