background image

GlucoMen

®

 LX  -  38973 - 09/07

UK

GlucoMen

®

 LX  -  38973 - 09/07

TeS�TinG a blOOd S�aMple

5.  Use the lancing device, loaded with a new lancet, to puncture the finger. (See lancing device 
 

instructions for use.)

6.  Gently squeeze your finger to help form a drop of blood.
7.  Touch the end of the test strip to the blood drop until the test strip is full and the on-screen 
 

countdown timer begins. (Beeper sounds if enabled.)

nOTe

The Blood Drop symbol flashes on and off repeatedly until sufficient blood has been added 
to the test strip.

8.  A countdown on screen appears while test is in progress. Glucose result is available 
 

on-screen in 4 seconds. 

9.  The result is automatically stored into memory.
10. Press the Left/Right 

 buttons to move between marked (

) or unmarked results. 

Marked results are not included  in the average test results. HI, LO, and Control results 
are not included in the average.

11. Press the Mode 

 button to save the Marking Status: Marked (

) or Unmarked.

12. If  test  result  is  above  33.3  mmol/L,  the  screen  displays  HI;  test  result  cannot 

be stored. If test result is below 1.1 mmol/L, the screen displays LO; test result cannot 
be stored.

TeS�TinG a blOOd S�aMple

nOTe

The meter will time out after 2 minutes of non-use or if the strip is removed. The keys are disabled until a 
strip is inserted. Results and marking status are saved if the meter times out, the strip is removed, or the 
meter is turned off.

nOTe

You must apply the sample to the GlucoMen

®

 LX Sensor test strip while the blood drop symbol is flashing 

in the display. If the meter turns off before sample application, remove the GlucoMen

®

 LX Sensor test strip 

and insert again.

nOTe

If blood is not applied within 2 minutes, the meter will go into “sleep mode” to conserve the battery life.

nOTe

Lancets are for one-time use only. Use a new, sterile lancet each time you test. Test different areas on 
your fingertips to avoid developing calluses. Remove the used lancet from the lancing device. Follow your 
local disposal regulations where applicable.

WarninG

Your lancing device is for your personal use only. DO NOT share with others. Sharing the lancing device or 
lancets can transmit very serious infections. To avoid accidental fingersticks injuries, do not store used lancets 
in the device after testing or arm the lancing device with a new sterile lancet unless ready to use.

Summary of Contents for GLUCOMEN LX




























Reviews: