A-Link WNAP4G User Manual Download Page 27

Page: 27 / 111

A-LINK WNAP4G User Manual



Manually: The device won

’t try to connect to Internet until users press

“connect” button at Status page. Once Internet connection is established, this

device will drop the connection if maximum idle time is reached.

Maximum Idle Time:

The amount of time of inactivity before disconnecting

Internet connection. Set it to zero, or choosing

“Auto-reconnect” mode to

disable this feature.

Service Name:

Input the service name if your ISP requires it. (Optional)

Assigned IP Address:

Input a IP address if your ISP requires it. (Optional)

Maximum Transmission Unit (MTU):

You can change MTU value if

required. The default MTU value is set to 0 (auto).

NAT disable:

You can disable NAT feature if required.

IGMP Proxy:

Enable this feature allows multicast stream (e.g. IPTV

stream) to pass-through this device.

C. Static IP Address

Summary of Contents for WNAP4G
















































































































Search results

Summary of Contents for WNAP4G

Reviews:

A-Link WNAP4G, User Manual, Page: 27 / 111

Search results

Summary of Contents for WNAP4G

Reviews: