A-LINK WNAP4G User Manual
103
4 Something wrong with the wireless connection?
A.
Can’t setup a wireless connection?
I.
Ensure that the SSID and the encryption settings are exactly the same to the
Clients.
II. Move the WNAP4G Router and the wireless client into the same room, and
then test the wireless connection.
III. Disable all security settings such as
WEP
, and
MAC Address Control
.
IV. Turn off the WNAP4G Router and the client, then restart it and then turn on
the client again.
V. Ensure that the LEDs are indicating normally. If no, make sure that the AC
power and Ethernet cables are firmly connected.
VI. Ensure that the IP Address, subnet mask, gateway and DNS settings are
correctly entered for the network.
VII. If you are using other wireless device, home security systems or ceiling fans,
lights in your home, your wireless connection may degrade dramatically.
Keep your product away from electrical devices that generate RF noise such
as microwaves, monitors, electric motors…
B. What can I do if my wireless client can not access the Internet?
I.
Out of range: Put the router closer to your client.
II. Wrong SSID or Encryption Key: Check the SSID or Encryption setting.
III. Connect with wrong AP: Ensure that the client is connected with the correct
Access Point.
i.
Right-click
on the
Local Area Connection icon
in the taskbar.
ii. Select
View Available Wireless Networks in Wireless Configure
.
Ensure you have selected the correct available network.
iii. Reset the WNAP4G Router to default setting