A-Link RoadRunner 21 Router
32
;
QoS:
Select the Quality of Service (QoS) type. If in doubt leave as default.
;
PCR:
Peak Cell Rate. This is an ATM (Asynchronous Transfer Mode) term to describe the
rate cells per second that the source device may never exceed. Available only when VBR
QoS is chosen.
;
SCR:
Security Cell Rate. This is an ATM (Asynchronous Transfer Mode) term to describe the
security cell transmitted per second.
;
MBS:
Maximum Burst Size. A term used in ATM (Asynchronous Transfer Mode) to specify
the maximum number of cells which can be transmitted at the contracted PCR (Peak Cell
Rate). Available only when VBR QoS is chosen.
;
CDVT:
Cell Delay Variation Time. The Cell Delay Variation is a term used in ATM
(Asynchronous Transfer Mode) to describe the time difference that is acceptable between
cells being presented at the receiving host. Available only when VBR QoS is chosen.
;
Auto PVC:
Click to enable Auto PVC features. Auto PVC allows detection of virtual channels
via the built-in mechanism for communicating ATM Layer information from DSLAM to the
A-Link RoadRunner 21 Router.
Renew:
Click the
Renew
button and the gateway will retrieve the IP Address, Subnet Mask, and
Gateway Address.
Release:
Click the
Release
button to release the IP Address, Subnet Mask and Gateway Address.
Apply:
Click
Apply
to complete the connection profile’s setting.
Delete:
Click
Delete
to delete a connection.
Cancel:
Click
Cancel
to ignore all the changes.
To complete and save the connection profile, go to
TOOLS
Æ
System Commands
and click
Save All
after clicking the
Apply
button.
