A-Link RoadRunner 21 Router
94
4.
Failed to configure the A-Link RoadRunner 21 Router through web browser ( By a client PC
in LAN )
Ans.
Check the following:
1. Check the hardware connection of the A-Link RoadRunner 21 Router’s LAN port. The LED will
lit when a proper connection is made.
2. Check your Windows TCP/IP setting (Refer to Chapter 3 for setting details).
3. Open the Windows System Command Prompt:
For Windows 9x/ME: Manually enter
winipcfg
, then press
Enter
.
For Windows 2000/XP: Manually enter
ipconfig/all
, then press
Enter
.
4. You should have the following information listed on your Window System:
IP Address: 10.0.0.1
Submask: 255.255.255.0
Default Gateway IP: 10.0.0.2
5.
I
forgot or lost my Administrator Password.
Ans.
Reset
the A-Link RoadRunner 21 Router
to factory default by pressing the
“Reset”
button
for 10 seconds.
If you are still getting prompted for a password when saving settings:
1.
A
ccess the Router’s web interface by going to
http://10.0.0.2.
2. Enter the default
“username”
and
“password”
then click
“Enter”
to log in.
3. Click
on
“TOOLS”
then click “
User Management”
.
4. Enter a new
“Password”
and
new
“Username”
in the
“Username”
and “
Password”
field,
and enter the same password in the second field to confirm the password.
5. Click
“Apply”
after your setting.
6.
I need to upgrade the Firmware.
Ans.
In order to upgrade the Firmware with the latest features, go to the A-Link website and download
the latest Firmware at
. Before proceed the upgrading process, check the following
details:
1. Download the latest Firmware and save at your pointed location.
2. Read the firmware release note carefully before proceed the upgrading process.
3. Refer
to
TOOLS
→
Update Gateway
section for the upgrading process.
