background image

Club ToasTer CTX-200

8

P/N 1010905 Rev. B 03/12 

McDonald’s

A.J. Antunes & Co.

oPeratIoN (continued)

Club toaster settings

The following table describes the recommended Club 

Toaster operating settings.

setting 

Value

Bottom Temp. (Lower 

Platen)

570° F (299° C)

Top Temp (Upper Platen) 570° F (299° C)
Speed (17 seconds)

2300

Note: If you wish to change any of the above set-

tings, contact the factory for instructions.

Viewing the Program Mode settings

Follow these steps to view these settings:

  1.  From the Ready or Wait modes, press and hold 

the 

PrGM

 button for 3 seconds.

  2.  The following appears on the display:
 

  Program Club 

Press Select

  3.  If desired, use the 

NeXt

 or 

PreV

 button to scroll 

through the following categories:

  •  Speed
  •  Language (default setting is English)
  •  Units (F/C) (default setting is F)
  •  Top Temp
  •  Bottom Temp
  4.  When the desired category is reached, press the 

select

 button 

oNCe.

 This will cause the selected 

category value to blink indicating it is in edit mode.

Note: the current setting will be the fIrst setting 

shown in the display. 

  5.  Press the PREv or NEXT buttons while the value 

is blinking to change adjust the setting.

Note: do Not change any of these settings for aNY 

reason! for assistance in changing these options, 

please call the factory.

  6.  When you are finished viewing settings, press 

the 

ProGraM 

button to return to the Ready 

screen or wait 10 seconds until the Ready screen 

appears.

Light Buns Dark

MOTOR

PLTN

CT

PLTN

PRGM

NEXT

PREV

SELECT

ADJUST

BELTS

STOP/START

figure 6. adjusting toasting Quality

Note: the unit will exit the Program Mode after 10 

seconds of inactivity.

Ct unit status Mode

This mode provides feedback on unit performance. No 

adjustments can be made in this mode. Also, the dis-

play remains on the selected screen in this mode until 

you switch screens or exit the Unit Status mode.

Follow these steps to view the Unit Status mode:

  1.  From any operation mode (Ready or Wait) press 

and hold the ADJUST button for 3 seconds.

  2.  The following appears on the display in sequence:

 

•  Speed-Motor-Set Pt

 

•  Total Hours

 

•  Ambient (air temperature inside the electrical  

 enclosure)

 

•  Top Temp (Actual temperature and set point  

 temperature)

 

•  Bottom Temp (actual temperature and set point  

 temperature)

Summary of Contents for McDONALD'S CTX-200





















Reviews: