A-iPower SUA9000E, Owner'S Manual

Page: 8 / 29

5. Engine Switch - Set this switch to ON before starting engine. Set switch to OFF to shut off engine.
1. Hour Meter
- Monitor run time and schedule maintenance intervals
2. Low Oil Alarm - Alarm when low oil is detected
8. GFCI 120V 20A 5-20R - Used to supply electrical power for the operation of 120V AC, 20A,
single phase 60HZ electrical loads.
4. 120V AC 30A L5-30R
- Used to supply electrical power for the operation of 120V AC, 20A,
single phase 60HZ electrical loads.
10. 120/240 VAC 30A L14-30R Twist-lock Receptacle
- Used to supply electrical power for the
operation of 120V AC and/or 240VAC, 30A, single phase 60Hz electrical loads.
3. Circuit Breaker
- The circuit breadker protects the generator against electrical overloads. The rating of
the breaker and the load it protects are marked near the breaker. Should any of the Circuit Breakers trip,
the generator will stop the electricity output. If this happens, unplug all loads from the generator. Allow
the generator to cool down. Then, press the tripped Circuit Breaker, restart the engine, and re-attach loads.
9. Ground Terminal
- Prior to each use, set up the ground wire (not included) connection to the
Grounding Terminal to properly ground the Generator.
CONTROL PANEL
1 3
8
4
5 6
2
7 9 10
7. 12V DC OUTPUT –
used for battery charging.
6. DC Circuit Breaker –
protect DC output, turn off automatically if the current exceeds 8A.
8