A-hand Technology Co., Ltd of Suzhou Industrial Park(215021) Operation instructions
Address: NO.88 Tangzhuang Road Suzhou-Singapore Industrial Park China
Tel: +86-512-6252-9140 Fax: +86-512-6252-2140
URL:http:// www.a-hand.com
multi-functional accessories, and reduces the incidence of failure, and is very convenient for the
operator. The functional key‘s functions are described as follows:
No.
Icon
Function name
Function description
1
88
LED display screen
Display present procedure code( 00…99).
2
Wire feeding mode
Manual feeding(left LED light always bright)/
automatic feeding(left LED light is out)
3
emergency stop
If experience a state of emergency, shut off the main
power.
4
Reverse feeding
When wire feeding mode is manual, manually adjust
the wire‘s output position. When wire feeding mode is
automatic, increase or decrease the wire feeding
speed.
5
Forward feeding
6
Decay stop
Turn off function and stop the welder according to the
system‘s pre-set sequence
7
Test of gas/current
＋
Test protective gas (or cooling water) before start
welding, when start welding, increase or decrease
welding current.
8
Test of water/current
－
9
Strat welding
After all the preparation work, implement automatic
welding process.
10
Engine head positive
rotation
Manually control head‘s swing, carry out forward /
reverse operation, observe whether the head is of
normal operationor adjust the head.
11
Engine head reverse
rotation
12
Procedure increase
Execute the work of procedure code‘s increase or
decrease.
13
Procedure decrease
14
Radial adjustment
Control attitude adjustor‘s Y-axis movement
15
Axial adjustment
Control attitude adjustor‘s X-axis movement
2.3.6
Conversion interface core assembly
