A-hand Technology Co., Ltd of Suzhou Industrial Park(215021) Operation instructions
Address: NO.88 Tangzhuang Road Suzhou-Singapore Industrial Park China
Tel: +86-512-6252-9140 Fax: +86-512-6252-2140
URL:http:// www.a-hand.com
.2.3.4 Dual size wire feeding output assembly
●Integrated wire plate‘s installation
Pull the lock wrench straightly like the left
figure, after wire plate to be installed is inserted
into the wire plate shaft; you can pull the lock
wrench levelly, as shown on the right figure.
The disassembly is just the inverse operation.
●Wire feeder‘s operation and adjustment
▲
Instruction of main parts‘ function:
Adjust handle (compress or release the wire
pressing racks, adjust the pressing by its scale)
Dual-rail guide wire wheel (it has 0.8 and 1.0 of
the guide wire slot. For wire of different diameter,
as long as twist off a screw of the top, manually
pull it out, and install reversely)
▲
wire‘s loading: handle up the hand knob
90 degrees (as shown in top figure), pressure wire
wheel will swing to the right at a certain angle
round the swing axis (as shown in bottom figure),
thread the wire loaded into the wire plate box into
the wire nozzle, then send the wire from the wire
nozzle into the back wire feeding tube (the
loading direction as shown in the bottom figure),
and then adjust the hand knob back to horizontal
position, appropriately adjust the pressure. Press the corresponding button of the full-function
controller assembly, the wire will be automatically sent out of the final wire nozzle by stepper
motor. If the wire can not be properly sent out of the wire nozzle, this is because of a big
knuckle within a short distance. If no failure, Unscrew the wire nozzle of the front wire rod,
then after the wire is sent out, screw the wire nozzle.
2.3.5 Full-function airborne controller
assembly
G85G is equipped with a full-function
controller to replace the remote controller of
old model, which reduces the sense drag of
Inner hexagon sunk screw
Aluminum wire plate box
Locking wrench
1.5kg Standard wire plate
Installed wire plate
Wire plate to be installed
Pinch roller
Dual-rail guide wire wheel
Precise stepping motor
Wire for welding
The swing axis
Adjusting handle
Inputting direction of wire
Feeding direction of wire
The wire pressing rack
