7
STEP 7
Carefully flip the base over on to its legs . Important: Two people are
required to move the bed base . Do not drag across the floor . Do not
rest frame on its side, excessive pressure may damage the legs .
installation guide
For customer support, visit
www.ahbeard.com
or call:
1300 654 000
STEP
8
Use the
CLIP LOCK
system to connect
mattress to the base .
Begin by removing both screws on platform
of base using Phillips head screw driver .
STEP 10
Attach female end of clip lock section to base .
Follow the bolting diagram to install the Clip Lock Strap . Repeat
step for other side .
Bolt
Metal Washer
Black Washer
Clip Lock Strap
Base
STEP 9
The male end of clip lock system is attached
to underside of mattress . Place mattress on
base and secure clip lock to base .
STEP
11
Plug the base into a power source .
A surge protector is strongly recommended.
STEP
12
If setting up a Divided Queen adjustable base, please see the
additional instructions that were provided for setup before
proceeding.
