A and T Labs
K6 Audio Power Amplifier Assembly Manual
2001 A and T Labs Inc.
AMK6a
18
any case, the current detection built into the power supply will protect the amplifier
sections, resulting in momentary shutdowns and an LED indication. The supply will
reset itself when the overload is removed. Finally, for maximum performance and power
output into 8 ohm loads, use the 82 volt power supply setting (Remember that the bias
current must be re-set for each voltage for long term operation. See section 4.3)
Finally, remember the power levels this amplifier is capable of, and be careful with both
your speakers and your ears. Happy listening!
