![9dot LiteSync Manual Download Page 9](http://html1.mh-extra.com/html/9dot/litesync/litesync_manual_3067522009.webp)
9
LITESYNC MANUAL
VER. 2 REV. 0
Figure 3 - LiteSync with fixing tabs at 90°
Installation
The LiteSync is designed for installation in a 19 "rack cabinet, however the fixing flaps can be rotated 90 ° for wall mounting.
Included are mounting tabs, one short and one long to complete the half rack unit.
IMPORTANT NOTE
: Use only the fixing screws supplied with the device for fixing the fins; the use of different fixing screws
can cause irreparable damage to the device.
To the correct operation of the surge arresters, is essential to ground the rack cabinet and connect the grounding terminal on
the back.
This makes it possible to mount two LiteSync on one rack unit.
Figure 5 - two LiteSync on one rack unit
Figure 4 - long mounting flap to complete the half rack unit