2
MANUAL GIGASYNC V2
VER. 2 REV. 1
1.
GIGASYNC
GigaSync is designed to power devices by Power Over Ethernet standard or directly by bipolar Terminals.
It consists of a Base Unit which can host up to three Cartridge expansions. The Base Unit holds the
control and main interface systems while Cartridges specify the power methods: Power Over Ethernet
or Terminals.
1.1.
Base Unit
On the front there are visible the 3 LEDs SYNC, STATUS and ALARM and the OPT function button. The
Base Unit can accommodate up to three cartridges in the Cartridge Slots, simply removing the metal
cover and inserting the cartridge. No fixing screws are required.
On the back there are power input terminals of the Base Unit and their cartridges. Each power input is
independent, insulated and equipped with reverse polarity protection. The voltage range is 18-60 Volts.
The Base Unit can also be powered by PoE IEEE 802.3af standard via the Ethernet. There are also
ports for the SYNC-IN and SYNC-OUT (respectively employable to acquire or replicate the sync pulse)
and the connector for the GPS antenna. For a correct operation of the surge protectors, it is necessary
to connect the ground terminal GND.
OPTION BUTTON
SYNC OUT / SYNC IN
CARTRIDGE SLOTS
LEDs
GPS ANTENNA CONNECTOR
CARTRIDGE REDUNDANT POWER CONNECTORS
MAIN POWER
ETHERNET PORT
POWER PRESENCE LEDs
GND
