909 S909, Instruction Manual

Page: 6 / 12

• If the fuse blows or if the overload protection is triggered,
this is a sign that the machine is overloaded and/or
that too many appliances are connected to the same
extension cable. Check the cause and remedy. Do not
install a more powerful fuse.
• Do not tug on the extension cable. Do not hold the cable
taut. This can cause damage in the plugs or in
the cables insulation. Such damage is invisible but can be
dangerous.
• Always keep the extension cable away from the machine.
Disconnect the plug from the electric socket and check
the cable regularly for signs of damage or ageing. Do not
use the machine with a damaged extension cable.
• If the cable is damaged, it must be replaced by an
authorised service centre in order to avoid a hazard.
• Never move the machine by pulling the cable. The
machine must not be moved with the motor running.
Wear goggles
Wear earmuffs
Wear a breathing mask
WARNING.
We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Accessories
The 909 Shredder is supplied with the following accessories
as standard:
• Hex key
• Push stick
• Spanner
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool
until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
6