12
Starting the engine
1. Before starting, ensure that no electrical apparatus has
been connected to the generator.
2. Turn the fuel tap (4) clockwise to the ‘on’ position.
3. Move the choke lever to the left hand side position.
4. Press “I” on the on/off rocker switch.
5. Slowly pull the recoil starter until you feel it engage and
then pull it briskly.
Note:
When the engine is started for the very first time, it
will require a number of attempts to start until the fuel has
travelled from the tank to the engine.
6. Once the engine has been operating for 10-15 seconds,
slowly return the choke lever back to the right hand side
position. This position will switch the choke ‘off’.
Note:
If the generator stops, move the choke back to the full
left hand side and repeat the starting operation..
Stopping the engine
1. Before stopping, ensure that
no electrical apparatus is
connected to the generator.
2. Press “O” on the engine switch
(6) to ‘stop’ the engine.
3. Turn the fuel tap (4) anti-
clockwise to the ‘off’ position.
Connecting apparatus to the generator - AC
1. Start the engine. Allow the
engine to run for a couple of
minutes to warm up prior to
connecting any apparatus to
the generator.
2. For 240V AC power, plug the
power cord into the AC output
socket (10).
Summary of Contents for A750
Page 17: ......
