909 10301 Instruction Manual Download Page 8

8

Introduction 

Congratulations on purchasing your new spotlight. Read 

this Instruction Manual and follow the instructions carefully 

before using your new Rechargeable Spotlight. 

Charging/recharging the spotlight

This unit is shipped in a partially charged state. Charge unit 

BEFORE first use using the 240VAC plug pack charger 

for 10-15 Hrs. Charge after each use. Whilst charging with 

either the AC charger or the DC vehicle charger, the status 

indicator will glow RED.

IMPORTANT. 

To prevent permanent damage to the battery 

ensure to fully charge the battery within 6 months of the 

production date.
Refer to the serial number. The first number is the year of 

manufacture, ie 1 is 2011. The next 2 numbers are the week 

of manufacture in that year. ie 14. So in this example, the 

Lantern was manufactured in week 14 of 2011.

Charging/recharging using the 240V AC plug pack charger

   Make sure the spotlight is off (the trigger lock is in the off 

position and the trigger is not depressed).

   Insert the plug of the 240V ac Plug Pack charger into the 

charging port at the rear of the Lantern. Plug the 240Vac 

Plug Pack charger into a normal house hold 240V Power 

point and turn on. The status indicator should glow RED.

   The red LED will remain ON while the charging process 

is operating. It will change to trickle charging after the 

battery is fully charged.

Charging/recharging using the 12 volt DC charger 

(optional accessory)

   Make sure the spotlight is off (the trigger lock is in the off 

position and the trigger is not depressed).

   Plug the barrel tip of the 12 volt DC charger into the car 

DC charging port at the rear of the lantern.

   Insert the 12 volt DC plug end into the accessory outlet of 

your vehicle or other 12 volt DC power source.

   Charge the Battery for a max of 8 hours. The red LED will 

remain ON during the charging process.

Make sure the DC source (jump-starter, battery pack, 

vehicle accessory outlet, etc.) is 12 volt DC and is able to 

supply at least one half amp at 12 volt DC for 8 hours.

Notes: 

When using a vehicle’s 12 volt DC accessory outlet 

as a charging source, be aware that some vehicles require 

you to turn on the ignition to power the accessory outlet.

WARNINGS:

   To avoid the risk of property damage, charge up to  

15 hours 

maximum

 using the ac charging method; up to 

8 hours 

maximum

 using the dc charging method.

   Never attempt to use the ac charger and dc charging port 

simultaneously.

Operating instructions

Operating the spotlight

1. Disconnect from charger.
2. The On/Off trigger is located in the front of the handle of 

the spotlight.

3. To turn the spotlight on, squeeze the trigger.
4. To turn off the spotlight, release the trigger.

Note: 

The On/Off trigger can be locked in the on position 

using the trigger lock switch on the side of the unit.

Operating the 3 LED Flash lights

1. Disconnect from the charger.
2. To turn on the LED lights, depress the 3 LED flashlight on 

/ off button (refer diagram, 

Know your product

)

3. To turn off the LED flashlights, depress the on / off button. 

Care and maintenance

All batteries lose energy from self-discharge over time and 

more rapidly at higher temperatures. When the unit is not 

in use, we recommend that the battery is charged at least 

every 60 days.

Summary of Contents for 10301













Reviews: