909 10301 Instruction Manual Download Page 6

6

   Keep sharp objects away from lens — it is glass and can 

break.

   Do not immerse spotlight in water.

   Do not expose this unit to extremely high temperatures.

   Do not drop or throw spotlight. It contains glass and a 

sealed lead acid battery.

   Use only with AC or DC charging adapters that are 

provided with unit. Plug in the charging adapter at the 

spotlight first, then plug into the charging source.

  DO NOT OVERCHARGE: CHARGE UP TO 15 HOURS 

MAXIMUM USING THE AC CHARGING METHOD; UP 

TO 8 HOURS MAXIMUM USING THE DC CHARGING 

METHOD.

   After charging/recharging, disconnect charging adapter or 

extension cord and wait 5 minutes before use.

   Do not crush, cut, pull or expose charging adapter cords 

to extreme heat.

   Position charging adapter cords so they do not become 

entangled or become a safety hazard. Keep charging 

adapter cords away from sharp edges.

   Use in a dry location only.

   Except for the bulb, there are no user-serviceable parts 

inside. Do not attempt to disassemble any other parts of 

the unit.

   To reduce risk of damage to electric plug and cord, pull 

by plug rather than cord when disconnecting.

   Turn the power switch off after using. Leaving the switch 

on may cause permanent damage to the battery.

Save these instructions 

Summary of Contents for 10301













Reviews: