Quick Start Guide (Analog Phone and Fax, 2-24 ports)
Activating Your AudioCodes ATA
You need your activation code (received via email) to activate your AudioCodes ATA. The activation code is received via email. You
can also retrieve the code via 8x8 Account Manager, if you have administrator access, by following these instructions:
1. Go to
login.8x8.com
.
2. Enter your administrator username and password, click Login.
3. In the Application Panel, click the
Account Manager
icon to launch the application.
4. Click
Phone System
in the top navigation bar, and select
View All Extensions
.
5. Click
Activate Device
next to the extension you wish to activate. A pop-up displays the activation code for the extension.
Note:
If you are activating an Overhead Paging system, follow the special instructions provided in the pop-up.
6. To activate your device for voice or fax service, connect an analog phone (or fax machine with a phone) to the
FXS
port on the
AudioCodes ATA that you want to activate.
7. Lift the handset, and follow the voice instructions to dial in the activation code. You hear a message confirming your ATA is
activated. The device should reboot automatically; you should only manually reboot the ATA if it does not reboot after 10
minutes, and if there is no dial tone on an attached analog device.
Note:
If you activate any port on the ATA, the other ports on the same ATA should activate automatically.
AudioCodes MP-112
AudioCodes MP-114
AudioCodes MP-118
AudioCodes MP-124
AudioCodes MP-112, MP-114, MP-118, and MP-124 ATAs
Q U I C K S T A R T G U I D E
