8level SMART WRT-150 User Manual Download

Page: 57 / 61

150Mbps Wireless Broadband Router

User Manual



DDNS Status: Current status of DDNS server.



DDNS Server Provider: For example, if you want to use service of “roay.cn”, you have to

first register and accounts for it. Other DDNS service providers as the same.



Username, Password, Dynamic Domain Name: After register an DDNS account from

DDNS service providers, you will get “User Name”, “Password”, ”Dynamic Domain

Name”, Input information in appropriate field.

4.12.

System Tools

System management includes password setup, web Setup, upgrade, reboot, restore, WOL and

System time.

4.12.1.

Firmware

Click "Browse..."button and select a File to upgrade, after you have selected the appropriate file,

click "Upgrade" button to execute upgrade procedure. Do not cut off the power supply during

the process of upgrading.

4.12.2.

Time Settings

You can choose the time server and the time zone for the system time.

Summary of Contents for SMART WRT-150






























































Search results

Summary of Contents for SMART WRT-150

Reviews:

Related manuals for SMART WRT-150

Brands by name

Popular brands

8level SMART WRT-150, User Manual

Search results

Summary of Contents for SMART WRT-150

Reviews:

Related manuals for SMART WRT-150

Brands by name

Popular brands