1）Hold down to power on.
2）Use the enclosed USB-cable to connect the NES30 Pro your PC. Your PC will immediately recognize the device.
3）You will be able to map the keys, in the game options of the game you are playing.
Note: When connecting the NES30 Pro to your PC the battery will also charge.
Upgrade firmware via PC or Mac
Note: Make sure the battery of the NES30 Pro is not empty. Otherwise use the USB-cable to charge the device.
1. Hold POWER+PAIRING on the NES30 Por. Yellow LED lights will be blinking.
2. Use the enclosed USB-cable to connect the NES30 Pro to your PC.
3. Download the NES30 Pro upgrade software from the www.8bitdo.com website and run the 8Bitdo_update.exe file in
Windows folder(for WIN user), or in MacOS folder (for MacOS user).
4. Select the xxx_firmware.dat firmware file and run the update.
LED Light(s) status
1. Blue light flashing: Bluetooth disconnected.
2. Solid Blue light(Breadth in 5s): Bluetooth connected.
3. Green light on: Battery charging.
4. Green light off: Charging completed.
5. Solid Red light: Battery low.
6. No LED lights active: Power off or Sleep mode.
To restore the NES30 Pro to factory settings hold down for 8
seconds.
The firmware of the NES30 Pro can be upgraded and functions may be changed or added. The final notices and features
can be checked on the official website.
Disclosure: Second English version of manual revised by Joshy Scheers, Chief Editor of 3rd-strike.com.
Future versions, may or may not be revised by other translators and thus this data may or may not be accurate.
