For two players: （iOS/Mac OSX/Android/PC）
Player 1 press Power + B to power on the NES30 Pro. (LED light will blink twice.)
Player 2 press Power + B + R to power on the NES30 Pro.(LED light will blink once, for a longer period of time.)
Both NES30 Pro will provide a different key code password to work with Bluetooth. The mapping of the k eys can be
done in game.
Multiplayer mode(s):
Android/Windows: Connect the NES30 Pro with the USB-cable or Bluetooth. Multiplayer support depends on the game
itself.
Mode 1, 2 and 3
Manual in Detail:
(Note: Make sure the battery of the NES30 Pro is not empty. Otherwise use the USB-cable to charge the device.)
Establishing Bluetooth connection with Mode 1, 2 or 3 activated:
Follow instructions on page Fast Startup Figure, to turn on the NES30 Pro in mode 1, 2 or 3.
1. Scan for Bluetooth devices on your Android/iOS device.
2. Select “8Bitdo NES30 Pro” in the list of available devices.
3. Map the keys in the app or emulator you will be playing.
Mode4（Emu-Touch screen mode）
Note: Android needs ROOT
1. Download the official 8Bitdo APP/APK from the official site at www.8Bitdo.com.
2. Follow the instructions on page Fast Startup Figure, to turn on the NES30 Pro in mode 4.
3. Run the 8Bitdo app and scan for Bluetooth devices. When detected tap “8Bitdo NES30 Pro” to pair.
4. If asked for pairing code (password), enter “0000”.
5. In Emu-Touch screen mode, press START to activate l 8Bitdo app.
6. Finally, drag and drop buttons in order to map the keys to your satisfaction. Press START to finish set-up.
Warning：
Android: After using Mode 4 and you wish to use Mode 1, 2 or 3, you will need to clear pairing information at system
Bluetooth first and then scan, pair again.
Tip: Double tap DPad or use two fingers can zoom it to fit games.
Mode5（Windows USB Cable Mode）
