background image

6

Fun with Voice and Sound Effects

To use sound effects: 

Press the 

SOUND EFFECTS

 pedal on the Main Stage 

or the 

SOUND EFFECTS 

key on the remote. A single press plays the same 

effect again. Press and hold the pedal (or use the 

+

 and 

 remote keys) to 

change effects. 

To add echo to your voice:

 Turn the 

ECHO

 dial on the left side of the Main 

Stage to Off, Low, or Max echo.

Step 6: Sing along!

The Singsation Main Stage comes with 2 microphones you can use to sing 
along or make announcements!

To sing along: 

Plug one or both of the provided microphones into the 

MIN 

IN 

jacks on either side of the Singsation Main Stage’s base. Start playing 

music on your Bluetooth device and start singing!

To adjust the volume of the microphones:

 Use the 

MIC VOLUME

 knob.

To adjust the volume of your music: 

Use the 

MUSIC VOLUME

 knob on the 

Main Stage, or use the volume controls on your Bluetooth device.

To adjust the volume of everything

Use the 

MASTER VOLUME

 knob on 

the Main Stage, or press 

VOLUME MODE

 on the remote and use its 

+

 and 

 keys.

To reduce or remove vocals from existing music:

 Try the 

MUSIC VOCAL

 

REDUCER

 button on the Main Stage. 

Main Stage Top

Summary of Contents for SINGSATION SPKA800













Reviews: