8 devices Carambola 2, Manual

Page: 8 / 14

Start terminal
Connection settings
•
115200 8N1, no hardware flow control.
Windows
I recommend using V-term32 (no need to install just unzip and run) or TeraTerm program.
Linux minicom
TODO
Linux picocom
picocom -f n -p n -b 115200 -i -r -l /dev/ttyUSB0
picocom -b 9600 /dev/ttyUSB0
•
Picocom man
•
To exit, press and hold CTRL, A, Q.
Other Linux uart settings and useful commands
If you do not have installed
stty
you should get it by typing
opkg install coreutils-stty
To set options:
stty -F /dev/ttyUSB0 cs8 9600 ignbrk -brkint -icrnl -imaxbel -opost -onlcr
-isig -icanon -iexten -echo -echoe -echok -echoctl -echoke noflsh -ixon -
crtscts
To get options:
stty -a -F /dev/ttyUSB0
To read from device
tail -f /dev/ttyUSB0