aGlass DK
Ⅱ
User
’
s Manual
2017 Beijing 7invensun Technology Co., Ltd All Rights Reserved.
Page 12 of 15
8
Disassembly and Maintenance of the Product
8.1
Disassembly of the Add-on
Click
http://www.aglass.com/assets/aGlass-DKII-Assembly-Guide-En.mp4
to learn how to
disassembly the product.
1)
Power off the Vive. Disconnect the USB wire between aGlass connector and Vive. Disconnect
the USB wire between aGlass connector and aGlass Add-ons.
2)
Rotate the lens distance knobs on both sides of the HTC Vive headset, to maximize the lens
distance.
3)
Rotate the IPD (pupillary distance) knob of HTC Vive, to maximize the IPD.
4)
Lift the thick and thin sides of the aGlass add-on for the left eye upward successively, to
loosen it from the HTC Vive lens, after which gently rotate anticlockwise while lifting upward
until the lower end of the aGlass add-on is loosened, to finally take out the add-on
completely; take out the aGlass add-on for the right eye from the other side in the same way
but rotate clockwise.
8.2
Precautions
1)
Hot plugging not supported. Please power off the Vive before plugging or unplugging USB
interface.
2)
Please store and use the product at room temperature.
3)
Do not expose the product in rain or moisture conditions.
4)
Do not throw, to avoid damage to the product caused by falling.
5)
Do not disassemble, repair or modify the product by yourself.
6)
Do not wipe the product with any chemical solvent.
7)
Do not throw the product away or
put it in high temperature (higher than 60°C) or fire to
avoid danger.
