7HP150 User Manual
27
7 Joining
a
Network
This chapter describes how to add a device to an existing HomePlug AV logical
network (AVLN) using the Security/Reset pushbutton and using the Utility.
Operation progress and outcome can be monitored by observing the behavior of
the power LED.
7.1 Using
the
Security/Reset
Pushbutton
Scenario:
Devices A and B are located in network N. Device C (the joiner) that is not located
in any networks attempts to join Network N. Any devices on Network N can
become the ‘adder’.
Figure 20 Joining a network
Do as follows to add Device C to Network N using the Security/Reset button:
Step 1
Press the
Security/Reset
button on Device A (or Device B) for less than
3 seconds, making it the ‘adder’.
Step 2
Within 2 minutes, press the
Security/Reset
button Device C (the ‘joiner’)
for less than 3 seconds.
Step 3
Wait for connection to complete.
The Power indicator on Device A (or Device B) and Device C will flash at 1 second
intervals until the process succeeds or fails. It will illuminate steadily on success. If
