background image

06

Precautions

Before using this dash cam, please read all the precautions and the online guide to ensure correct and safe use.

 

This dash cam is intended to assist drivers with the purpose of recording the environment outside the vehicle. The dash cam does not guarantee 

the user’s driving safety. We shall not be held liable for any accident, damage, or loss of information caused by operating the dash cam while 

driving.

 

Due to differences in vehicle conditions, driving style, driving environment, etc., some functions may not work properly. A power failure, usage in 

environments outside the normal operating temperature or humidity range,  or a collision may cause the dash cam to function abnormally. There 

is no guarantee that this dash cam will function normally under all circumstances. Videos recorded by this dash cam are for reference only.

 

The eMMC (Embedded Multi Media Card) is built in the dash cam for storage. You can find the memory capacity information on the label and the 

package.

 

Install this dash cam correctly, and do not block the driver’s line of sight, nor block the vehicle’s airbag, in order to avoid product failure or 

personal injury.

 

Use the included car charger, power cord, and other accessories in order to avoid product failure due to non-conformance. We shall not be held 

liable for any loss or damage caused by the use of a non-genuine car charger or power cord.

 

The dash cam is equipped with a built-in battery that cannot be removed. Do not disassemble the dash cam. Do not expose batteries or battery 

packs to sunlight, fire, or environments where the ambient temperature is extreme heat. There is a risk of explosion if the battery is incorrectly 

installed, therefore only use and replace with the same or an equivalent type of battery.

 

Keep the dash cam dry and away from water or splash to avoid battery malfunction.

 

If the battery becomes deformed, swollen, or starts leaking during use or storage, stop using the dash cam immediately in order to avoid safety 

issues, and contact after-sales service.

 

Never wash the dash cam with chemical solvent or cleaner.

 

Keep this dash cam away from any strong magnetic fields, as they may cause damage to the dash cam.

 

Do not use this dash cam in environments with temperatures over 60°C or below -10°C.

 

When the dash cam has been working for a while, the temperature of the outer surface may rise. Touch the surface with caution.

 

Only use this dash cam within the scope permitted by law.

Summary of Contents for M500











Reviews: