background image

Safety Instructions

•  WATER AND MOISTURE:

 In order to prevent any re or shock hazard, do not expose this equipment to rain or 

moisture.

• 

POWER SOURCE:

 The equipment should be connected to a 220-240V 50/60Hz or 12V DC power source.

• 

POWER CORD PROTECTION:

 Do not cut, kink, damage or modify the power cord supplied with the equipment, 

keep the power supply cord away from heaters and harmful chemicals. Do not place heavy objects on the power 
cord.

• 

Operation on Generator:

 When operating the Amplier on a generator, make sure it is switched ‘OFF’ till the 

generator voltage has stabilized and then only switch the amplier ‘ON’.

• 

VENTILATION:

 The amplier should be situated so that its location or position does not interfere with its proper 

ventilation, Also do not insert or drop anything into the ventilation holes.

• 

PREVENTION OF LOSS IN SPEAKER CABLES: 

Always use thick cables for low impedance speakers 

connections, Use of cable type 23/38 or thicker is recommended as heavy current ow through the cables.

• 

PROPER SELECTION OF OUTPUT TERMINALS:

 When 70v/100V line is used, do not connect speakers 4Ω/8Ω/16Ω 

(low impedance) tap. Similarly do not connect speakers to 70V/100V line when 4Ω/8Ω/16Ω tap is being used.

• 

GROUNDING OR EARTHING:

 The equipment must be earthed properly before operating it to avoid electric shock. 

A wire from the earth terminal must be connected to either water pipe or to electrical earth for safe operation.

Specifications

Power Source

Power Output

Output regulation

Input/Sensitivities

Frequency Response

Tone Controls

Signal to Noise ratio

Output

Speaker output

Dimensions

Weight

AC:220-240V 50/60Hz
DC:12V (Car battery)

160 Watts RMS Max,
120 Watts RMS at 10% THD,
105 Watts RMS at 5% THD

2db, no load to full load at 1kHz

5xMIC 0.60mV/4.7kΩ
1xAux 100mV/470kΩ

50Hz-15,000hz ±3db

BASS:- ±8db at 100Hz
TREBLE:±8db at 10kHz

60db

Pre-Amp 200mV/600Ω, Line 1V/1k

Ω

4Ω, 8Ω, 

16Ω

, 70V & 100V

(W415 x H132 x D280)MM

9.500Kg

Thanks for using amplifiers.

For any assistance/suggestion

visit us at www.5core.com

MADE IN INDIA

ISO 9001:2015

M5400913IN

CERTIFICATE NO.: 16RQ07AY

Summary of Contents for Pro series

Page 1: ...Mixer Cassette Player etc BASS TREBLE controls provided for shaping tonal quality of music speech as desired MASTER control permits adjustment of overall volume of program inputs PRE OUT for connecting Cassette Recorder for recording or for connecting additional Booster Ampli ers 70V 100V line for long distance speakers connections Bluetooth Feature Thank you for purchasing 5CORE PA Ampli er Pleas...

Page 2: ... Switch for MIC 4 AUX input 23 Selector Switch for MIC 5 24 Socket 25 FM mode selector micro switch 26 Play Pause micro switch 27 Prev CH micro switch 28 Next CH micro switch 29 IR Sensor 30 3 Core AC Main Cable with Plug 31 BATTERY Terminal Block For connecting a 12V Car Battery as standby power source 32 EARTH Terminal 33 AC MAINS FUSE 3 Amp 250V This prevents excessive current ow caused by any ...

Page 3: ...eaker cable to reduce power loss in the cables Make proper matching speaker connection as explained below High impedance 70V 100V line speaker connections 16W 16W COM 4W 8W 16W COM 4W 8W 16W 16W 16W Resultant Impedance 16 2 8W Resultant Impedance 16 2 8W Connecting two Speakers like 5C WC 50DX in parallel Connecting two driver units like 5CU 60 in parallel Connecting four Speakers like 5CA 30T in ...

Page 4: ... or thicker is recommended as heavy current ow through the cables PROPER SELECTION OF OUTPUT TERMINALS When 70v 100V line is used do not connect speakers 4Ω 8Ω 16Ω low impedance tap Similarly do not connect speakers to 70V 100V line when 4Ω 8Ω 16Ω tap is being used GROUNDING OR EARTHING The equipment must be earthed properly before operating it to avoid electric shock A wire from the earth termina...

Reviews: