4xem BBPCHOME, User Manual

Page: 72 / 77

Mainboard User’s Manual
Press <Enter> after entering the password. At the next prompt,
confirm the new password by retyping it and pressing <Enter>
again.
To disable the password, press
<Enter> instead of entering a new
password when the “Enter Password” dialog box appears. A
message appears confirming that the password has been disabled.
If you have set supervisor and user passwords, only the supervisor
password allows you to enter the BIOS Setup Program.
Note:
If you forget your password, the only way to solve this
problem is to discharge the CMOS memory by turning
power off and placing a shunt on jumper JP12 to
short pin 2 and pin 3 for five seconds, then putting the
shunt back to pin 1 and pin 2 of JP12.
4.13. Save & Exit Setup Option
Selecting this option and pressing <Enter> will save the new
setting information in the CMOS memory and continue with the
booting process.
4.14. Exit Without Saving
Selecting this option and pressing <Enter> will exit the Setup
Utility without recording any new values or changing old ones.
This concludes Chapter 4. Chapter 5 describes the drivers and utility
programs that are packaged with the motherboard.
Load Fail-Safe Defaults Optionl 64