4xem BBPCHOME, User Manual

Page: 57 / 77

BIOS Configuration
If you set this field to “Hot KEY,” you can press a hot key
combination to power on the computer. The hot key is set in the “Hot
Key Power ON” field. Options are:
BUTTON ONLY (default)
Keyboard 98
Password
Hot KEY
Mouse Left
Mouse Right
Any KEY
KB Power ON Password : This field becomes available when you
select “Password” in the POWER ON Function field. Select this field
and press ENTER. You are prompted to input a password. Type in
your password and press ENTER. You are prompted to confirm your
password. Retype your password and press ENTER. Your password
is saved. The next time you power on your computer, you must type
in your password before you can power the computer on. After you
type your password, press any key or the power button.
Hot Key Power ON : This field becomes available when you select
“Hot Key” in the POWER ON Function field. Options for this field
are “Ctrl-F1” ~ ”Ctrl-F12.”
Onboard Serial Port 1 : This option is used to assign the I/O
address and address and interrupt request (IRQ) for onboard serial
port 1 (COM1).
Onboard Serial Port 2 ( optional ) : This option is used to assign
the I/O address and address and interrupt request (IRQ) for onboard
serial port 2 (COM2).
UART Mode Select : This field is available if the Onboard Serial
Port 2 field is set to any option but Disabled. UART Mode Select
enables you to select the infrared communication protocol-Normal
Integrated Peripherals
49