4Swiss BM202 x JJ, User Manual

Page: 14 / 20

14
TROUBLESHOOTING
The motor has blocked / stopped or does not want to start
• Check if the power cord is properly connected
•
Check if the juicing bowl and the drum lid are properly assembled.
• Check if the device is assembled according to the manual.
The juicing bowl is stuck and cannot be disassembled from the
power unit
• Check if there are some remaining ingredients in the juicing bowl.
• Check if there are no other objects in the juicing bowl.
• Press the button
►
for 3-5 seconds. Repeat that action 2-3 times.
Then pull the juicing bowl up.
The juicer stopped while extracting
• Check if there are not too many ingredients in the juicing bowl.
• Check if the juicer was not used for longer than 30 minutes
continuously.
• If the juicer stops because it was working too long, turn it off for a few
minutes and back on.
• Do not put more fruits to the inlet of products that are already there
haven’t been extracted yet.
Scratches on the juicing screw
• Minor scratches appear from proper juice extraction. This is normal
feature of the device.
Juice leaking from the juicing bowl
• Check if the rubber seal is positioned correctly in the pulp outlet.
• Check if there are not too many ingredients in the juicing bowl.
• Insert the prepared ingredients separately, one piece at a time.
The juicing bowl shakes
• It is normal for the juicing screw and strained to vibrate and it comes
from the working motor.