4smarts Eara TWS, User Manual

Page: 10 / 12

EN
• The product turns off automatically
after 5 to 6 minutes, if it is not
connected to a device.
• Shortly press the multifunction key
(5) to take a call, and quickly click it
twice to reject a call.
• Note: Only one headphone will con-
tinue to operate during phone calls.
After the phone call has ended, the
second headphone will automatically
re-connect.
- Listening to music:
• Shortly press the multifunction key
(5) to pause and play music. Keep
the multifunction key pressed for
one second to forward to the next
song title.
- Neckstrap:
• Optionally push the thin end of the
headphone into the opening of the
neckstrap (9) for wearing the head-
pones around your neck.
VI. Troubleshooting
Setting up connection doesn‘t work
- Make sure that the product:
• is fully charged.
• is inside the working range of the
device.
• is not already connected to any
other device (deactivate Bluetooth at
surrounding, other devices).
- Make sure that your terminal device:
• is compatible to the Bluetooth
version, listed in the technical data in
this manual.
• has an active Bluetooth connection,
and is in pairing mode.
• does not have other, active connec-
tions running.
- Depending on the terminal device and
its software, setting up the connection
may take longer. Wait up to a minute,
or try again in surroundings with less or
minimal radio communication.
The communication is not clear
- Try again in a mostly wind and hall free
surrounding.
- Try to connect the product to a different
terminal device.
- Try to call to a different terminal device.
- Try again in surroundings with less or
minimal radio communication.
VII. Care and Maintenance
Only use a soft, dry cloth to clean the
device.
VIII. Warranty
The 4smarts GmbH assumes no liability
and provides no warranty for damage
resulting from improper installation or
10