4RF Aprisa LTE User Manual Download Page 119

Page: 119 / 248

Managing the LTE | 119

Aprisa LTE User Manual 2.1

DHCP Client > General Setup

This page configures the setup of a DHCP Client interface.

Protocol

This parameter allows changing the Protocol for this logical interface. If you want to switch protocols, select

the desired one from the drop down list, then click the ‘Switch protocol’ button when prompted with ‘Really
switch protocol?’.

The default setting is DHCP Client.

Option

Function

Static Address

Allows assignment of one or more IPv4 and/or IPv6 static
addresses, along with manual configuration of default gateway.

DHCP Client

Allows automatic configuration of IPv4 address, netmask, gateway
and DNS servers through the DHCP protocol.

DHCPv6 Client

Allows automatic configuration of IPv6 from any combination of
stateless DHCPv6, stateful DHCPv6, DHCPv6-PD and SLAAC.

Hostname to send when requesting DHCP

If it is blank (default) then the hostname set in Terminal > Device > Hostname will be used.

Summary of Contents for Aprisa LTE

























































































































































































































































Search results

Summary of Contents for Aprisa LTE

Reviews:

Related manuals for Aprisa LTE

Brands by name

Popular brands

4RF Aprisa LTE, User Manual

Search results

Summary of Contents for Aprisa LTE

Reviews:

Related manuals for Aprisa LTE

Brands by name

Popular brands