26
Wireless Module Installation
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
3.
Remove the 2 screws and slide the expansion cover in the direction of the arrow. Note the location
of the attachment socket.
4.
Slide the wireless module into the panel, ensuring it is plugged securely into the socket.
5.
Reattach the 2 screws that secure the wireless module to the main unit.
6.
Reconnect the power cord and any external devices, then turn on the system.