13
Compact Flash Card Installation
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
3.
Remove the system box and cover.
4.
Locate the Compact Flash (CF) card socket in the side of the system box.
5.
Insert the CF card into the socket, pressing firmly until the card release button is fully extended.
6.
Replace the system cover and box.
7.
Reconnect the power cord and any external devices, then turn on the system. The system should
automatically recognize the CF card when the system power is turned on.
NOTE:
CF card and 2.5 inch HDD master/slave setting:
The system allows the use of both the CF card and hard disk at the same time,
however the user will need to set the system BIOS for the preferred boot order.
When either a CF card only or 2.5 inch hard disk only is installed, the BIOS will
automatically designate it as the 'master' drive and system boot device.