Table of Contents
Setting up your Listen Four Quarters
1. Power off your Eurorack system.
2. Connect the free end of the included power cable to a 16-pin Eurorack power header
on your power supply distribution system. The red stripe should match the white line
or -12V marking on the power distribution board. The other end of the power cable is
a 10-pin connector which should already be connected to the
Listen Four
Quarters
with the red stripe on the power cable orientated towards the bottom of the module.
Note: The
Listen Four
Quarters
is reverse-polarity protected, but incorrectly
connecting any module can damage any other on the power bus.
3. Using the included screws, securely attach the
Listen Four
Quarters
to the rails of
your case.
4. Power on your Eurorack system.
Setting up your Listen Four Quarters
2
....................................................................
Inputs
3
.....................................................................................................................
Main Outputs
3
.........................................................................................................
Stereo TRS/Balanced Switch
4
................................................................................
Headphones Output
4
..............................................................................................
INS Header
5
............................................................................................................
OUTS Header
5
.........................................................................................................
Daisy-chaining
5
.......................................................................................................
Anti-pop circuitry
7
...................................................................................................
Electrical and Mechanical Specifications
7
..............................................................
Page of
2
7
