17
User Manual ENGLISH
EAP/OWL-Series Wave 2 Enterprise Access Point
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
3.4
Management
VLAN for
Management: When this is enabled, management traffic from the system will be tagged with a
VLAN ID. In other words, administrators who need to access the WMI must send management traffic with
the same VLAN ID such as connecting to a specific VAP with the same VLAN ID. Enter a value between 1
and 4094 for the VLAN ID if the option is enabled.
SNMP Configuration: to obtain the system information remotely.
-
Enable/ Disable:
Enable
or
Disable
this function.
-
Community String: The community string is required when accessing the Management
Information Base (MIB) of the system. Read: Enter the community string to access the MIB with
Read privilege. Write: Enter the community string to access the MIB with Write privilege.
-
Edit SNMPv3 User List: The system allows 5 SNMP Users with Read or Read & Write Access.
Determine the Name and Authentication Password on the SNMP Account List.
-
Trap: When enabled, events on Cold Start, Interface UP & Down, and Association & Disassociation
can be reported to the assigned server.
-
Server IP Address: Enter the IP address of the assigned server that will receive the trap report.
Syslog Level: Select the desired level of received events from the drop-down menu. “Debug” level is as
default setting.
Remote Syslog Server: When this function is enabled, specify an external SYSLOG server to receive SYSLOG
messages from the system remotely.
-
Enable/ Disable:
Enable
or
Disable
this function.
-
SYSLOG Server IP: The IP address of the Syslog server that will receive the reported events.
-
Server Port: The port number of the Syslog server.
Management IP List: Enter source IP address/subnet of administrator PCs which are allowed to access the
WMI of this AP. Anyone else that is not on this List will be denied for WMI access. The default entry
0.0.0.0/0.0.0.0 means that administrators are allowed to access the WMI from anywhere.
LED: To turn on or off the Status LED indicator on the AP.
