Quick Installation Guide
EAP300 802.11n/a/b/g Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
3
Antenna Panel
Figure 2 EAP300 Antenna Panel
Antenna Connector:
Attach the antennas here.
LED Panel
Figure 3 EAP300 LED Panel
1
LED ON indicates power on; OFF indicates power off.
2
LED OFF indicates RF is not ready; ON indicates RF is ready; CLINKING indicates
transmitting/receiving data.
3
LED ON indicates Ethernet cable connected; OFF indicates no connection.
4
For future use.
5
To indicate WES status.
Master
Slave
WES Start
LED (Green) OFF and then
BLINKING SLOWLY
LED (Green) OFF and then
BLINKING QUICKLY
WES Negotiate
BLINKING NORMALLY BLINKING
NORMALLY
WES Negotiate Timeout
LED (Yellow) ON
LED (Yellow) ON
WES Success
LED (Green) ON
LED (Green) ON
WES Fail
LED (Red) ON
LED (Red) ON
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
