Quick Installation Guide
EAP300 802.11n/a/b/g Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
10
Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)
To extend the wireless coverage, EAP300 supports up to 4 WDS links for connecting wirelessly to other
WDS-capable APs (peer APs). By default, all WDS profiles are disabled.
¾
Click on the
WDS
main menu button.
¾
Select
the
WDS Configuration
tab.
¾
Choose the desired WDS profile:
(a) Enable the
WDS
(b) Enter the
MAC Address of Remote AP
(peer AP) and then Click
SAVE
If you use another EAP300 as the peer AP, simply repeat the above-mentioned steps to configure another
peer AP(s).
Note:
On each and every configuration page, you may
Click
Save
to save the changes, but you must reboot the system upon the completion of all
configuration settings for the changes to take effect. When clicking
Save
, the following message will
appear:
“Some modifications have been saved and will take effect after Reboot.”
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
