Replacing the blades
Unscrew the bolt and remove the
blades. Note that blades are labeled
with letters, and you have to install
the according to the picture, or the
drone won’t take off.
Unscrew the bolt to separate the two
blades and replace them. Replace
the damaged D/B labeled blade with
the new D/B labeled blade and the
damaged A/C with the new A/C
blade.
Charging the drone
First, push the battery lock of the drone (1) and remove the batteries (2).
Insert the USB cable into the USB port on a power supply
1
, and connect the other
side to the battery port. When charging, the drone’s red indicator light is on, and the
green light is flashing. When the battery is fully charged, the red indicator light goes
off, and the green indicator light will stay on, indicating that the battery is charged
1. Power supply should have the maximal output of 5V, 2A, and it can be:
a) Laptop computer
b) Desktop computer
c) Portable power source
d) USB power adapter
e) USB power socket
